FTI 45mm extrusions were used to provide a 10 ft. wide back-wall with angled wing-walls for a tradeshow booth. Wire-mesh wings allowed products to be positioned for easy viewing. Three (free standing) support tables were provided with laminate tops and sliding-door access for literature storage below.
FTI 30mm series extrusions were used to construct (8) base frames with 1/2 inch thick acrylic front panels that were CNC routed with the customer's logo and edge-lit with LED lighting to provide a dramatic effect. (2) of the frames were provided with a 4 inches extruded column to support a digital projector. Blue pvc side panels and a laminated wood top provided product support. The rear of each cabinet had a pvc access door for excess storage of product, literature, and personal belongings.
30mm extrusions were used to provide a lightweight yet rigid solution for 12 ft. product displays that had graphics applied as well as product support hooks. The focal point of these sections was an additional 6 ft. high section bolted on top to create an intimidating 18 ft. structure that towered above the competition. The wall sections are hinged together to be configured in various angles to maximize booth presentation and direct foot-traffic.
FTI 30mm extrusions were provided for a hinged back-drop to provide product and graphics display. Modular 4 inch wall sections were shipped in a re-usable container.
Framing Technology Inc.
25 Louise Street, Rochester, NY USA 14606
